Answer

Many toolmakers regard 5/16 and 8mm to be interchangeable. 5/16 is about 2 thousandths of an inch smaller, 0.06096mm, but it shouldn’t matter on a hardened Allen bolt, and I’ve never stripped the internal socket of a hardened steel Allen bolt.

Are 8mm and 5/16 the same thing?

due to the fact that there are just 0.04/16 “By computation, there is a discrepancy of 0.0625mm. As a result, the 8mm will be too big for the 5/16″ fastener, while the 5/16” will be too tiny for the 8mm. Because of the fastener manufacturers’ tolerances, you can probably use any socket on either bolt.

Second, what is the metric equivalent of 5 16?

ISO and IFI Fastener Conversion Chart Inch Equivalent Metric Size-Pitch 10- 24th Rec. M5x.8 ten-to-thirty-two

a quarter to twenty

M6x 1 5/16-18 1/4-28

M8x 1.25 3/8-16 5/16-24 M8x

M10x 1.5 3/8- 24 M10x 3/8- 24 M10x 3/8- 24 M

People often wonder whether an 8mm bolt will fit a 5-16.

8mm threaded rod vs. 5/16″ threaded rod “It makes no difference at all. 5/16 inch smooth rods “will function, but not with LM8UU linear bearings Bearings or bushings manufactured particularly for 5/16 would be required “rodeo

What does a size less than 5 8 mean?

Bolt Wrench Size Chart Bolt Diameter

Wrench Dimensions (Standard)

Wrench Dimensions (Metric)

7/16″ 5/8″ 16mms1/2″ 3/4″ 19mms9/16″ 13/16″ 21mms5/8″ 15/16″ 24mm

There are 39 questions and answers that are related to each other.

What is the size of 2mm in millimetres?

2mm is around 1/16 inch. 3mm is nearly an eighth of an inch.

On a ruler, what does a millimetre look like?

Each each line on a metric ruler represents a millimetre (mm). Centimeters are represented by the numbers on the ruler (cm). Each centimetre is divided into ten millimetres. The decimal point is shifted one position to the right when translating from centimetres to millimetres.

On a ruler, how large is 5 mm?

5 millimetres (0.5 or 1/2 centimetre) 6 millimetres (0.6 cm) 7 millimetres (0.7 cm) 8 millimetres (0.8 cm)

On a ruler, how many millimetres are in an inch?

25.4 millimetres x 25.4 millimetres x 25.4 mill

On a ruler, how large is a mm?

Rulers are typically 30 cm long and are labelled with prominent numerals. There should be ten smaller markings called millimetres between each centimetre (cm) mark (mm).

What is the mm equivalent of 3 8?

Fractional Inches to Decimal Inches and Metric Millimeters mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm 0.1181 3.0000 1/8 0.1250 3.1750 0.1378 3.5000 0.1378 3.5000 0.1378 3.5000 0.1378 3.5000 0.1378 3.5000 0.1378 3.5000 0.1378 3.

In fractions of an inch, what is 8mm?

Table of millimetres to inches conversions Centimeters (mm) (inches) “( (decimal) (inches) “( (fraction) 9 mm 0.3543 ′′ 23/64 ′′ 10 mm 0.3937 ′′ 25/64 ′′ 20 mm 0.7874 ′′ 25/32 ′′ 8 mm 0.3150 ′′ 5/16 ′′ 9 mm 0.3543 ′′ 23/64 ′′ 10 mm 0.3937 ′′ 25/64 ′′

5 16th of an inch is how many millimetres?

Equivalent Measurements in Fractions, Decimals, and Millimeters Millimeters Fraction Decimal Fraction Decimal Fraction Decimal Fraction Decimal Fraction Deci 516″ 0.3125 7.9375 38″ 0.375 9.525″ 516″ 0.3125 7.9375″ 516″ 0.3125 7.9375″ 516″ 0.3125 7.93 716″ 0.4375 11.1125″ 0.4375″ 0.4375″ 0.4375″ 0.4375″ 12″ 0.5 12.7″ 0.5″ 0.5″ 0.5″ 0.5″ 0.5″

What is the metric equivalent of 3 8?

Metric / Standard Chart of Wrench Conversions Bolt Dimensions Metric Measurement 1/4″ 7/16″ 11mm 5/16″ 1/2″ 13mm 1/8″ 5/16″ 8mm 3/16″ 3/16″ 10mm 1/4″ 7/16″ 11mm 5/16″ 1/2″ 13mm

What is the diameter of an 8mm bolt?

Shoulder Bolt Dimensions in Metric Diameter of the Shoulder (A) a strand (C) Allen Wrench Dimensions 10mm 8mm x 1.25mm 8mm 6mm x 1.0mm 8mm 6mm x 1.0mm 8mm 6mm x 1.0mm 8mm 6mm x 10mm x 1.5mm 5mm 12mm 6mm 16mm 12mm x 1.75mm 6mm 16mm 12mm x 1.75mm 6mm 16mm 12 8mm

What is the bolt size that will fit a 15mm socket?

Wrenches in the following sizes are required: 11,13,15,17,19,22,24,27,30,32,36mm. I think the M8 bolt that comes with the 15mm wrench is the correct one. The heads of M8s are normally 12 or 13mm in diameter.

What is the difference in size between a 5/16 and a 3/8 bolt?

3/8″ = 9.525 mm, 5/16″ = 7.9375 mm Between the bolt sizes stated are 8 and 9 mm.

What is the smallest size after 3 16?

Hole Diameters of Drill Bits Fractional Size Metric Size 3 millimetres 1181 3/16 4 mm . 1575 13/64 5 mm . 1968 7/32

Is #8 the same as m8?

The answer to your question is that M8 refers to a metric 8mm diameter machine screw/hexagon headed fully threaded set screw. Therefore there is a great difference in actual diameter and type of thread between the two screws; the #8 woodscrew actually being close to half the size in diameter than the metric screw is.

ncG1vNJzZmivp6x7r6%2FEq6upp5mjwW%2BvzqZma2hiZ3xxfY6wn5qso2KvqrPGnqlmcJ2ierC%2BjG5kam5encGuuA%3D%3D